F209 Donut Loadcell
Standard Ranges 1000, 2000 and 4000kN (100 to 400tonnef)
- Hardened stainless steel body
- Very high structural load limit
- Standard 1 year warranty
- Tensile applications are ‘fail-safe’
- Flying lead or connector option
- Traceable calibration with certificate included in the standard price
Non-linearity - Terminal
Creep - 20 minutes
Rated output - Nominal
Rated output - Rationalised (1000 and 2000kN)
Zero load output
Temperature effect on rated output per °C
Temperature effect on zero load output per °C
Temperature range - Compensated
-10 to +50
Temperature range - Safe
-10 to +80
Excitation voltage - Recommended
Excitation voltage - Maximum
Insulation resistance - Minimum at 50Vdc
Overload - Safe
Overload - Ultimate
Weight - Nominal (excluding cable)
7 to 9
All standard ranges are manufactured in stainless steel.
Geometry: Axial strain cylinder in a sealed case, with raised end load bearing faces and hole right through. For use in compression or in fail-safe tensile applications.
The F209 is ideally suited to engineering force measurements including through centre safety testing of cables, rods and bolts.
It is designed for easy installation, usually between two flat faces bearing on its loading rings, either unattached or with retaining spigots positioned in the centre hole. Alternatively tensile load transfer can be achieved via a tie rod assembly through the centre hole. In this way the loadcell can indirectly measure tensile loads in a "fail-safe" mode.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
Compression, IP65, unrationalised
Compression, IP65, rationalised
Change the F to a P for the connector version.
Structural Stiffness - Nominal
4.0 x 1010
8.0 x 1010
1.6 x 1011
- AL = Applied load.
- RL = Rated load.
- Temperature coefficients apply over the compensated range.
- The load must be applied directly through the central loading axis.
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 16-2-4C or a 4 pin Binder 723 series chassis plug.
Excitation + = Red or pin 1, Excitation - = Blue or pin 2, Signal + = Yellow or pin 3, Signal - = Green or pin 4, Screen = Orange.
The screen is not connected to the loadcell body.
Outline drawing of the product.
F209CFR0H0 1000kN (100tonnef)
F209CFR0H0 2000kN (200tonnef)
F209CFR0H0 4000kN (400tonnef)
F209CPR0H0 1000kN (100tonnef)
F209CPR0H0 2000kN (200tonnef)
F209CPR0H0 4000kN (400tonnef)