F312 Custom Shear Pin Loadcell

Custom Ranges
We can manufacture shear pin loadcells to your specific requirements.

If you contact us using the “Make an enquiry” button and send it to our sales department we will respond with a quotation, usually within 24 hours. We need at least one contact number or email address to return the quotation! More information can be found in the F312 Engineering Application Sheet.

If you contact us using the “Make an enquiry” button and send it to our sales department we will respond with a quotation, usually within 24 hours. We need at least one contact number or email address to return the quotation! More information can be found in the F312 Engineering Application Sheet.

Specification

ParameterValueUnit
Load range-tonnef
Non-linearity - Terminal±0.1 to ±0.3% RL
Repeatability±0.1% RL
Rated output - Nominal2.2mV/V
Zero load output±4% RL
Temperature effect on rated output per °C±0.005% AL
Temperature effect on zero load output per °C±0.005% RL
Temperature range - Compensated-10 to +50°C
Temperature range - Safe-10 to +80°C
Excitation voltage - Recommended10V
Bridge resistance350
Insulation resistance - Minimum at 50Vdc500MΩ
Overload - Safe50% RL
Overload - Ultimate100% RL
SealingIP65
Cable length2m

Notes

  • AL = Applied load.
  • RL = Rated load.
  • Temperature coefficients apply over the compensated range.

Enquire about F312 Custom Shear Pin Loadcell

Related Products

Low Range Donut Load Cell
  • Capacity / Rated Load: 7.5 – 50kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Medium Range Donut Load Cell - Low
  • Capacity / Rated Load: 10 – 200kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Medium- High Range Donut Load Cell
  • Capacity / Rated Load: 400 – 800kN
  • Non – Linearity: 0.25%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
High Range Donut Load Cell
  • Capacity / Rated Load: 1000 – 2000kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
High Range Donut Load Cell - Low Profile
  • Capacity / Rated Load: 1000 – 4000kN
  • Non – Linearity: 1.0%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Load Washer
  • Capacity / Rated Load: 10 – 200kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Load Washer - Low Profile
  • Capacity / Rated Load: 10 – 200kN
  • Non – Linearity: 2.0%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Cylindrical Load Cell - Female Threads
  • Capacity / Rated Load: 10 – 500kN
  • Non – Linearity: 0.2 – 0.5%RL
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Cylindrical Load Cell - Female Threads
  • Capacity / Rated Load: 5- 1000kN
  • Non – Linearity: 0.05%RL
  • Special Features: Thread Sizes to Suit Standard Rod End Bearing / Rose Joints
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Cylindrical Load Stud - Male Threads
  • Capacity / Rated Load: 15 – 60kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Compact Canister Load Cell with Load Ring
  • Capacity / Rated Load: 5 – 40kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Compact Canister Load Cell with Load Button
  • Capacity / Rated Load: 100 – 400kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Axial or Radial Cable Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Canister Load Cell with Load Button
  • Capacity / Rated Load: 10 – 2000kN
  • Non – Linearity: 0.05 – 0.4%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Range Pancake Load Cell
  • Capacity / Rated Load: 1 – 10kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Medium Range Pancake Load Cell
  • Capacity / Rated Load: 25 – 200kN
  • Non – Linearity: 0.1%RL
  • Special Features: In Line Adaptor Plates, Fixing Kits and Other Load Fittings Available
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Pancake Load Cell
  • Capacity / Rated Load: 1 – 500kN
  • Non – Linearity: 0.1%RL
  • Special Features: In Line Adaptor Plates, Fixing Kits and Other Load Fittings Available
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
1/2" Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 250N – 1kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M3 Male Thread Versions Available
15mm Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 100 – 800N
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M4 Male Thread Versions Available
20mm Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 100N – 3.2kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M5 Male Thread Versions Available
30mm Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 100N – 6.4kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M6 Male Thread Versions Available
Deci-Newton Axial Bending Beam Load Cell
  • Capacity / Rated Load: 0.1N
  • Non – Linearity: 0.2%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Ultra Low Range Axial Bending Beam Load Cell
  • Capacity / Rated Load: 10 – 500N
  • Non – Linearity: 0.15%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Range Axial Bending Beam Load Cell - Female Drive
  • Capacity / Rated Load: 30 – 300N
  • Non – Linearity: 0.05%RL
  • Standard Variants: Compression Only Load Button Version Available
Low Range Axial Bending Beam Load Cell - Male Drive
  • Capacity / Rated Load: 100 – 800N
  • Non – Linearity: 0.1%RL
Compact Low-Medium Range Axial Load Cell
  • Capacity / Rated Load: 50N – 2.5kN
  • Non – Linearity: 0.1 – 0.35%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Bending Beam Load Cell
  • Capacity / Rated Load: 200N – 60kN
  • Non – Linearity: 0.05%RL
  • Special Features: High Level of Compensation for Off-Axis Forces
  • Standard Variants: Compression Only Flat or Convex Base and Tension / Bi-directional Thread or Eye Base Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Shear Beam Load Cell
  • Capacity / Rated Load: 80 – 240kN
  • Non – Linearity: 0.1%RL
  • Standard Variants: Compression Only Flat or Convex Base and Tension / Bi-directional Thread Base Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Premium Universal Bending Beam Load Cell
  • Capacity / Rated Load: 1 – 400kN
  • Non – Linearity: 0.03%RL
  • Special Features: High Level of Compensation for Off-Axis Forces
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Range Single Point Bending Beam Load Cell
  • Capacity / Rated Load: 1 – 3N
  • Non – Linearity: 0.1%RL
Single Point Bending Beam Load Cell
  • Capacity / Rated Load: 50 – 300N
  • Non – Linearity: 0.05%RL
Single Point Shear Beam Load Cell
  • Capacity / Rated Load: 5 – 160kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal In-line Shear Force Load Cell
  • Capacity / Rated Load: 5 – 50kN
  • Non – Linearity: 0.05%RL
  • Special Features: Can be Used to Support a Large Cantilever Load
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Cost Diaphragm Load Cell with Load Button
  • Capacity / Rated Load: 20 -40kN
  • Non – Linearity: 2.0%RL
  • Special Features: Supplied Without a Full Calibration Certificate, Intended for Large Volume OEM Applications Only
Diaphragm Load Cell with Load Button
  • Capacity / Rated Load: 5 – 50kN
  • Non – Linearity: 0.5%RL
  • Special Features: Dual Fixing Options for Increased Versatility
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Diaphragm Load Cell with Load Button - Low Profile
  • Capacity / Rated Load: 50 – 100kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Diaphragm Load Cell with Load Ring - Low Profile
  • Capacity / Rated Load: 50N – 10kN
  • Non – Linearity: 0.3 – 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
3-Axis Gear Shift Load Cell
  • Capacity / Rated Load: 200N
  • Non – Linearity: 0.5%RL
  • Special Features: Ergonomic Design. Direct Replacement of Existing Part
  • Custom Options: Custom Force Ranges / Dimensions and Single or 2-Axis Versions Available
Custom Low Range 2-Axis Load Cell
  • Capacity / Rated Load: 0.1 – 100N
  • Non – Linearity: 0.5%RL
  • Special Features: Both Axes 90° to Each Other in Vertical Plane
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Medium - High Range 2-Axis Load Cell
  • Capacity / Rated Load: 2 – 10kN
  • Non – Linearity: 0.5%RL
  • Special Features: Both Axes 90° to Each Other in Vertical Plane
  • Standard Variants: Spherical Bearing or Hard Fixing Options Available
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Low - Medium Range 2 or 3-Axis Load Cell
  • Capacity / Rated Load: 100N – 5kN
  • Non – Linearity: 0.5%RL
  • Special Features: 2-Axis Version Configurable for 90° in Either Vertical or Horizontal Plane
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Medium - High Range 2 or 3-Axis Load Cell
  • Capacity / Rated Load: 10 – 20kN
  • Non – Linearity: 0.3%RL
  • Special Features: 2-Axis Version Configurable for 90° in Either Vertical or Horizontal Plane
  • Custom Options: Custom Force Ranges / Dimensions Available
Axial Force and Torque Load Cell
  • Capacity / Rated Load: Custom Range
  • Non – Linearity: 0.05%RL
Custom Static Torque Transducer - Low Profile
  • Capacity / Rated Load: Custom Range
  • Non – Linearity: 0.5%RL
  • Special Features: High Level of Compensation for Off-Axis Force. Excellent for Robotics Applications
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Shear Pin Load Cell
  • Capacity / Rated Load: Custom Range
  • Non – Linearity: 0.1 – 0.3%RL
  • Custom Options: Custom Force Ranges / Dimensions Available
Radial Web Tension / Roller Bearing Load Cell
  • Capacity / Rated Load: 50 – 500N
  • Non – Linearity: 0.03%RL
Low Range Axial Proving Ring Load Cell
  • Capacity / Rated Load: 0.5 – 20N
  • Non – Linearity: 0.2%RL
Low Range Axial Proving Ring Load Cell
  • Capacity / Rated Load: 0.5 – 20N
  • Non – Linearity: 0.2%RL