F225 High Load Ultra Low Profile Loadcell
Standard Ranges 50 and 100kN (5 and 10tonnef)
- Ultra low profile
- Fail-safe failure mode
- Hardened stainless steel
- IP67 sealing option
- Traceable calibration with certificate included in the standard price
- Standard 1 year warranty
Specification
Parameter | Value | Unit |
Non-linearity - Terminal | ±0.5 | % RL |
Hysteresis | ±0.5 | % RL |
Creep - 20 minutes | ±0.05 | % AL |
Repeatability | ±0.02 | % RL |
Rated output - Nominal | 2.3 | mV/V |
Rated output - Rationalised | 2.0 | mV/V |
Rationalisation tolerance | ±0.5 | % RL |
Zero load output | ±4 | % RL |
Temperature effect on rated output per °C | ±0.005 | % AL |
Temperature effect on zero load output per °C | ±0.005 | % RL |
Temperature range - Compensated | -10 to +50 | °C |
Temperature range - Safe | -10 to +80 | °C |
Excitation voltage - Recommended | 10 | V |
Excitation voltage - Maximum | 10 | V |
Bridge resistance | 350 | Ω |
Insulation resistance - Minimum at 50Vdc | 500 | MΩ |
Overload - Safe | 50 | % RL |
Overload - Ultimate | 300 | % RL |
Sealing - R option | IP65 | |
Sealing - S option | IP67 | |
Weight - Nominal (excluding cable) | 0.8 | kg |
Geometry: Ultra low profile axial loadcell for use in force measurements in compression.
The ultra slim design provides for ease of installation beneath heavy machinery mounts, hydraulic rams or interposed within series mechanical compression assemblies.
In the event of structural failure of the loadcell the resulting vertical movement of the supported load including normal deflection will not exceed 2.5mm.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
Order Codes
Code | Description |
F225CFR0H0 | Compression, IP65, unrationalised |
F225CFR0HN | Compression, IP65, rationalised |
Change the R to an S for IP67 sealing. | |
Structural Stiffness - Nominal
Range (kN) | Stiffness (N/m) |
50 | 2.1 x 1010 |
100 | 4.2 x 1010 |
Notes
- AL = Applied load.
- RL = Rated load.
- Temperature coefficients apply over the compensated range.
- The load must be applied directly through the central loading axis.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.
Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.
The screen is not connected to the loadcell body.
