+44 (0)1424 852 744

F310 Axial Force And Torque Transducer

Range 50N and 2Nm
  • Low cross talk
  • Custom ranges
  • Simple installation
  • Direct outputs without calculation
  • Traceable calibration with certificate included in the standard price
  • Standard 1 year warranty
f310
5e25b4365c90f.jpg
5da58f87a3095.gif
Download PDF
Geometry: Monocoque strain structure with no moving parts.

The F310 depicted measures force and torque in the same axis with minimal cross talk providing user friendly outputs for direct measurement without mathematical manipulation.

Each channel may be calibrated bi-directionally. The version of the transducer depicted was developed for an OEM producing texture analyser machines (rheometers) for use in the food process industry.

We are happy to design variants of this loadcell to meet your specific requirements. Variants may include different combinations of force and moment axis e.g. FxMz, FyMx, FzMy etc.

Additional information on specifying a multi-axis loadcell can be found in Engineering Sheet E015.

The F310 depicted measures force and torque in the same axis with minimal cross talk providing user friendly outputs for direct measurement without mathematical manipulation.

Each channel may be calibrated bi-directionally. The version of the transducer depicted was developed for an OEM producing texture analyser machines (rheometers) for use in the food process industry.

We are happy to design variants of this loadcell to meet your specific requirements. Variants may include different combinations of force and moment axis e.g. FxMz, FyMx, FzMy etc.

Additional information on specifying a multi-axis loadcell can be found in Engineering Sheet E015.

Make an enquiry

Specification

ParameterValueUnit
Non-linearity - Terminal±0.05% RL
Hysteresis±0.05% RL
Creep - 5 minutes±0.1% AL
Repeatability±0.05% RL
Maximum cross talk1% RL
Rated output - Nominal0.6mV/V
Rated output - Rationalised0.5mV/V
Rationalisation tolerance (applies to single direction calibrations)±0.5% RL
Zero load output±4% RL
Temperature effect on rated output per °C±0.005% AL
Temperature effect on zero load output per °C±0.02% RL
Temperature range - Compensated-10 to +50°C
Temperature range - Safe-10 to +80°C
Excitation voltage - Recommended10V
Excitation voltage - Maximum10V
Bridge resistance350Ω
Insulation resistance - Minimum at 50Vdc500MΩ
Overload - Safe50% RL
Overload - Ultimate300% RL
Weight - Nominal (excluding cable)250g

Order Codes

CodeDescription
Most F310 loadcells are manufactured to special requirements and are given an F310-Zxxxx number.

Notes

  • AL = Applied load.
  • RL = Rated load.
  • Temperature coefficients apply over the compensated range.
  • Values apply to force and moment in all load combinations.
  • Extraneous forces or torques other than those calibrated may create moment errors.

Connections

The F310 is fitted with 2 metres of PVC insulated 9 core screened cable type 7-1-9C. The screen is not connected to the loadcell body.
Function Wire Colour
Fz Mz
Excitation + Red Violet
Excitation – Blue Black
Signal + Yellow Brown
Signal – Green White
Screen Orange

Files

TitleTypeFile
Outline drawing of the product.Outline Download
F310UF00H0 All standard rangesSTEP File Download

Enquire about F310 Axial Force And Torque Transducer

Back to products

Related Products

Low Range Donut Load Cell
  • Capacity / Rated Load: 7.5 – 50kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Medium Range Donut Load Cell - Low
  • Capacity / Rated Load: 10 – 200kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Medium- High Range Donut Load Cell
  • Capacity / Rated Load: 400 – 800kN
  • Non – Linearity: 0.25%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
High Range Donut Load Cell
  • Capacity / Rated Load: 1000 – 2000kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
High Range Donut Load Cell - Low Profile
  • Capacity / Rated Load: 1000 – 4000kN
  • Non – Linearity: 1.0%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Load Washer
  • Capacity / Rated Load: 10 – 200kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Load Washer - Low Profile
  • Capacity / Rated Load: 10 – 200kN
  • Non – Linearity: 2.0%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Cylindrical Load Cell - Female Threads
  • Capacity / Rated Load: 10 – 500kN
  • Non – Linearity: 0.2 – 0.5%RL
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Cylindrical Load Cell - Female Threads
  • Capacity / Rated Load: 5- 1000kN
  • Non – Linearity: 0.05%RL
  • Special Features: Thread Sizes to Suit Standard Rod End Bearing / Rose Joints
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Cylindrical Load Stud - Male Threads
  • Capacity / Rated Load: 15 – 60kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Compact Canister Load Cell with Load Ring
  • Capacity / Rated Load: 5 – 40kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Compact Canister Load Cell with Load Button
  • Capacity / Rated Load: 100 – 400kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Axial or Radial Cable Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Canister Load Cell with Load Button
  • Capacity / Rated Load: 10 – 2000kN
  • Non – Linearity: 0.05 – 0.4%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Range Pancake Load Cell
  • Capacity / Rated Load: 1 – 10kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Medium Range Pancake Load Cell
  • Capacity / Rated Load: 25 – 200kN
  • Non – Linearity: 0.1%RL
  • Special Features: In Line Adaptor Plates, Fixing Kits and Other Load Fittings Available
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Pancake Load Cell
  • Capacity / Rated Load: 1 – 500kN
  • Non – Linearity: 0.1%RL
  • Special Features: In Line Adaptor Plates, Fixing Kits and Other Load Fittings Available
  • Standard Variants: Cable or Connector Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
1/2" Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 250N – 1kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M3 Male Thread Versions Available
15mm Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 100 – 800N
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M4 Male Thread Versions Available
20mm Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 100N – 3.2kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M5 Male Thread Versions Available
30mm Diameter Miniature Diapraghm Load Cell
  • Capacity / Rated Load: 100N – 6.4kN
  • Non – Linearity: 0.5%RL
  • Standard Variants: Compression Only Load Button and Tension / Bi-directional M6 Male Thread Versions Available
Deci-Newton Axial Bending Beam Load Cell
  • Capacity / Rated Load: 0.1N
  • Non – Linearity: 0.2%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Ultra Low Range Axial Bending Beam Load Cell
  • Capacity / Rated Load: 10 – 500N
  • Non – Linearity: 0.15%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Range Axial Bending Beam Load Cell - Female Drive
  • Capacity / Rated Load: 30 – 300N
  • Non – Linearity: 0.05%RL
  • Standard Variants: Compression Only Load Button Version Available
Low Range Axial Bending Beam Load Cell - Male Drive
  • Capacity / Rated Load: 100 – 800N
  • Non – Linearity: 0.1%RL
Compact Low-Medium Range Axial Load Cell
  • Capacity / Rated Load: 50N – 2.5kN
  • Non – Linearity: 0.1 – 0.35%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Bending Beam Load Cell
  • Capacity / Rated Load: 200N – 60kN
  • Non – Linearity: 0.05%RL
  • Special Features: High Level of Compensation for Off-Axis Forces
  • Standard Variants: Compression Only Flat or Convex Base and Tension / Bi-directional Thread or Eye Base Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal Shear Beam Load Cell
  • Capacity / Rated Load: 80 – 240kN
  • Non – Linearity: 0.1%RL
  • Standard Variants: Compression Only Flat or Convex Base and Tension / Bi-directional Thread Base Versions Available
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Premium Universal Bending Beam Load Cell
  • Capacity / Rated Load: 1 – 400kN
  • Non – Linearity: 0.03%RL
  • Special Features: High Level of Compensation for Off-Axis Forces
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Range Single Point Bending Beam Load Cell
  • Capacity / Rated Load: 1 – 3N
  • Non – Linearity: 0.1%RL
Single Point Bending Beam Load Cell
  • Capacity / Rated Load: 50 – 300N
  • Non – Linearity: 0.05%RL
Single Point Shear Beam Load Cell
  • Capacity / Rated Load: 5 – 160kN
  • Non – Linearity: 0.1%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Universal In-line Shear Force Load Cell
  • Capacity / Rated Load: 5 – 50kN
  • Non – Linearity: 0.05%RL
  • Special Features: Can be Used to Support a Large Cantilever Load
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Low Cost Diaphragm Load Cell with Load Button
  • Capacity / Rated Load: 20 -40kN
  • Non – Linearity: 2.0%RL
  • Special Features: Supplied Without a Full Calibration Certificate, Intended for Large Volume OEM Applications Only
Diaphragm Load Cell with Load Button
  • Capacity / Rated Load: 5 – 50kN
  • Non – Linearity: 0.5%RL
  • Special Features: Dual Fixing Options for Increased Versatility
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Diaphragm Load Cell with Load Button - Low Profile
  • Capacity / Rated Load: 50 – 100kN
  • Non – Linearity: 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
Diaphragm Load Cell with Load Ring - Low Profile
  • Capacity / Rated Load: 50N – 10kN
  • Non – Linearity: 0.3 – 0.5%RL
  • Custom Options: High Temperature / Vacuum Compatible Versions Available
3-Axis Gear Shift Load Cell
  • Capacity / Rated Load: 200N
  • Non – Linearity: 0.5%RL
  • Special Features: Ergonomic Design. Direct Replacement of Existing Part
  • Custom Options: Custom Force Ranges / Dimensions and Single or 2-Axis Versions Available
Custom Low Range 2-Axis Load Cell
  • Capacity / Rated Load: 0.1 – 100N
  • Non – Linearity: 0.5%RL
  • Special Features: Both Axes 90° to Each Other in Vertical Plane
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Medium - High Range 2-Axis Load Cell
  • Capacity / Rated Load: 2 – 10kN
  • Non – Linearity: 0.5%RL
  • Special Features: Both Axes 90° to Each Other in Vertical Plane
  • Standard Variants: Spherical Bearing or Hard Fixing Options Available
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Low - Medium Range 2 or 3-Axis Load Cell
  • Capacity / Rated Load: 100N – 5kN
  • Non – Linearity: 0.5%RL
  • Special Features: 2-Axis Version Configurable for 90° in Either Vertical or Horizontal Plane
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Medium - High Range 2 or 3-Axis Load Cell
  • Capacity / Rated Load: 10 – 20kN
  • Non – Linearity: 0.3%RL
  • Special Features: 2-Axis Version Configurable for 90° in Either Vertical or Horizontal Plane
  • Custom Options: Custom Force Ranges / Dimensions Available
Axial Force and Torque Load Cell
  • Capacity / Rated Load: Custom Range
  • Non – Linearity: 0.05%RL
Low Range Custom Static Torque Transducer
  • Capacity / Rated Load: 10mNm – 5Nm
  • Non – Linearity: 0.05%RL
Medium - High Range Custom Static Torque transducer
  • Capacity / Rated Load: 2 – 2000Nm
  • Standard Variants: Multiple Standard Design Suggestions
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Static Torque Transducer - Low Profile
  • Capacity / Rated Load: Custom Range
  • Non – Linearity: 0.5%RL
  • Special Features: High Level of Compensation for Off-Axis Force. Excellent for Robotics Applications
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Static Torque Transducer - Low Profile
  • Capacity / Rated Load: Custom Range
  • Non – Linearity: 0.1%RL
  • Special Features: Custom Designed to Support Axial or Cantiliver Weight of User Defined Drive Motor
  • Custom Options: Custom Force Ranges / Dimensions Available
Custom Shear Pin Load Cell
  • Capacity / Rated Load: Custom Range
  • Non – Linearity: 0.1 – 0.3%RL
  • Custom Options: Custom Force Ranges / Dimensions Available
Radial Web Tension / Roller Bearing Load Cell
  • Capacity / Rated Load: 50 – 500N
  • Non – Linearity: 0.03%RL
Low Range Axial Proving Ring Load Cell
  • Capacity / Rated Load: 0.5 – 20N
  • Non – Linearity: 0.2%RL
Low Range Axial Proving Ring Load Cell
  • Capacity / Rated Load: 0.5 – 20N
  • Non – Linearity: 0.2%RL