The F268 is ideally suited to process weighing applications which have harsh environmental requirements. The design configuration allows it to be used for installations for tank, hopper, weigh platforms or weigh bridges.
We are happy to design shear or bending beams to meet your specific requirements. Versions can be manufactured for fully compensated operation up to +250°C. Please consult our engineering department.
The F268 is ideally suited to process weighing applications which have harsh environmental requirements. The design configuration allows it to be used for installations for tank, hopper, weigh platforms or weigh bridges.
We are happy to design shear or bending beams to meet your specific requirements. Versions can be manufactured for fully compensated operation up to +250°C. Please consult our engineering department.
Parameter | Value | Unit |
---|---|---|
Non-linearity - Terminal | ±0.1 | % RL |
Hysteresis | ±0.1 | % RL |
Creep - 20 minutes | ±0.05 | % AL |
Repeatability | ±0.02 | % RL |
Rated output - Rationalised | 2.0 | mV/V |
Rationalisation tolerance (applies to single direction calibrations) | ±0.1 | % RL |
Zero load output | ±4 | % RL |
Temperature effect on rated output per °C | ±0.002 | % AL |
Temperature effect on zero load output per °C | ±0.005 | % RL |
Temperature range - Compensated | -10 to +50 | °C |
Temperature range - Safe | -10 to +80 | °C |
Excitation voltage - Recommended | 10 | V |
Excitation voltage - Maximum | 10 | V |
Bridge resistance | 350 | Ω |
Insulation resistance - Minimum at 50Vdc | 500 | MΩ |
Overload - Safe | 50 | % RL |
Overload - Ultimate | 100 | % RL |
Sealing | IP65 |
Code | Description |
---|---|
F268CFR0HN | Compression, IP65, rationalised |
F268UFR0HN | Bi-directional, IP65, rationalised |
F268TFR0HN | Tension, IP65, rationalised |
Range (kN) | Stiffness (N/m) |
---|---|
5 | 1.3 x 108 |
10 | 2.0 x 108 |
20 | 3.3 x 108 |
40 | 6.6 x 108 |
80 | 8.5 x 108 |
120 | 1.3 x 109 |
160 | 1.7 x 109 |