It is aimed at dynamic applications that require high speed measurement.
It delivers high speed measurements of 4800 samples per second at 13 bit noise free resolution.
Simply by plugging the device into a PC, data can be measured from a loadcell using the FSU-SSBD for a wide range of high speed systems. This is achieved using the powerful Toolkit software to provide optimised, fast viewing of data. It allows the viewing of input status and module information, simple switching between engineering units as well as two part calibration, high speed navigation and FFT frequency component analysis. Data can be exported to a CSV file.
This free-standing module is fitted with 9-way ‘D’ type socket for connection to the loadcell while a micro USB socket allows connection to a PC and does not require external power. A DIN rail mounting option is also available.
If the FSU-SSBD is supplied with a loadcell it will normally be calibrated to read the loadcell output in the same force units as the loadcell calibration. A traceable system certificate will be supplied for the FSU and loadcell combination.
Alternative calibrations are possible; please consult our engineering department to discuss your requirements.
It is aimed at dynamic applications that require high speed measurement.
It delivers high speed measurements of 4800 samples per second at 13 bit noise free resolution.
Simply by plugging the device into a PC, data can be measured from a loadcell using the FSU-SSBD for a wide range of high speed systems. This is achieved using the powerful Toolkit software to provide optimised, fast viewing of data. It allows the viewing of input status and module information, simple switching between engineering units as well as two part calibration, high speed navigation and FFT frequency component analysis. Data can be exported to a CSV file.
This free-standing module is fitted with 9-way ‘D’ type socket for connection to the loadcell while a micro USB socket allows connection to a PC and does not require external power. A DIN rail mounting option is also available.
If the FSU-SSBD is supplied with a loadcell it will normally be calibrated to read the loadcell output in the same force units as the loadcell calibration. A traceable system certificate will be supplied for the FSU and loadcell combination.
Alternative calibrations are possible; please consult our engineering department to discuss your requirements.
| Parameter | Value | Unit |
|---|---|---|
| Bridge Excitation | 4.5 (Min) / 5 (Typical) / 5.25 (Max) | Vdc |
| Loadcell Excitation System | 4 wire | |
| Bridge Impedance | 80 (Min) / 350 (Typical) / 5000 (Max) | Ohms |
| Bridge Sensitivity | -3 (Min) / +3 (Max) | mV/V |
| Offset Temperature Stability | 1 (Typical) / 4 (Max) | ppm/°C |
| Gain Temperature Stability | 3 (Typical) / 5 (Max) | ppm/°C |
| Offset Stability with Time | 20 (Typical) / 90 (Max) | ppm of FR * |
| Gain Stability with Time | 30 | ppm of FR /1st Year |
| Non-linearity | 5 (Typical) / 25 (Max) | ppm of FR |
| Internal Resolution | 16 Million | Counts/Divisions |
| Resolution at 4.8kHz (Noise Stable) ** | 8192 | Counts/Divisions |
| Resolution at 4.8kHz (Noise Stable) ** | 13 | bit |
| USB cable length | 5 | m |
| Case dimensions | See diagram | |
| Operating temperature range | -40 (Min) / 85 (Max) | °C |
| Storage temperature | -40 (Min) / 85 (Max) | °C |
| Humidity | 0 (Min) / 95 (Max) | %RH Non condensing |
| Protection | IP50 |
| Title | Type | File |
|---|---|---|
| Printable manual. | PDF Manual | Download |
