Home » Products » Instrumentation » Loadmeters » SD039 Integral Loadmeter
It has an 8mm LED display for easy reading in poor light conditions. The loadmeter has push button tare and peak hold. When it is calibrated the update rate can be set to one of eight values to give some signal filtering to improve the display stability.
The sizes of the loadmeter board and the battery enclosure that we often use are shown below with a picture of a typical installation. If you have a project that requires a loadmeter to be mounted in a loadcell please consult our engineering department to discuss the possibilities.
It has an 8mm LED display for easy reading in poor light conditions. The loadmeter has push button tare and peak hold. When it is calibrated the update rate can be set to one of eight values to give some signal filtering to improve the display stability.
The sizes of the loadmeter board and the battery enclosure that we often use are shown below with a picture of a typical installation. If you have a project that requires a loadmeter to be mounted in a loadcell please consult our engineering department to discuss the possibilities.
Parameter | Value | Unit |
---|---|---|
Battery voltage | 9 (Min) / 14 (Max) | V |
Operating current | 40 | mA |
Typical battery life - PP3 | 10 | hr |
Operating temperature range | -40 (Min) / 85 (Max) | °C |
Reverse polarity protection | -30 (Max) | V |
Bridge excitation | 4.75 (Min) / 5.0 (Typical) / 5.25 (Max) | V |
Bridge Impedance | 350 (Min) / 5000 (Max) | Ω |
Bridge sensitivity | -7.0 (Min) / +7.0 (Max) | mV/V |
Filtering - 8 ranges | 40 (Min) / 500 (Max) | ms |
Nonlinearity | 0.002 | %FR |
Zero temperature stability | 0.1 | ±µV/°C |
Span temperature stability | 0.001 | ±%FR/°C |
Code | Description |
---|---|
In most cases the SD039 will be supplied in a special version of a loadcell that will have a Z number code. For a new design we normally supply the required code number at the time of order. | |
CE - This instrumentation product complies with the requirements of the European EMC directive. |